RG-AP880-I Wi-Fi 6 Indoor Access Point

Previous 2 / 2 Next

RG-AP880-I Wi-Fi 6 Indoor Access Point Indoor Access Point Ruijie Network Wireless Access Point System & Products


RG-AP880-I is our next-generation flagship ultra-high-performance Wi-Fi 6 enterprise AP designed for challenging high density indoor scenarios, powered by the 5th gen X-sense smart antenna for 360o zero-dead zone coverage. With the built-in IoT module, enterprise customers can be ready for future IoT expansion to boost the operational efficiency and customer experience.

The Ruijie RG-AP880-I supports concurrent dual-band dual-radio (4x4:4 in 2.4GHz, 8x8:8 in 5GHz), up to 12 total spatial streams and a maximum of 5.95Gbps wireless throughput. Taking the advantage of Wi-Fi 6 OFDMA Modulation, MU-MIMO, and BSS Color Spatial.


Specifications


Model

 RG-AP880-I

Hardware specifications

Radio

Dual-radio dual-band

Radio 1: 2.4G 11ax: 4×4 MIMO

Radio 2: 5G 11ax: 8x8 MIMO

Protocol

Supports standard 802.11ax, dual-radio dual-band, concurrent 802.11ax and 802.11a/b/g/n/ac

Operating Bands

802.11b/g/n/ax 2.4G ~ 2.483GHz

802.11a/n/ac/ax 5.1505.350GHz5.475.725GHz5.7255.850GHz (vary depending on different countries)

Spatial Streams

Up to 12: 4×4:4 in 2.4GHz , 8×8:8 in 5GHz

Max Throughput

Maximum throughput of 2.4G: 1.15Gbps

Maximum throughput of 5G: 4.8Gbps

Maximum throughput per AP: 5.95Gbps

Modulation

OFDMBPSK@6/9MbpsQPSK@12/18Mbps16-QAM@24Mbps64-QAM@48/54Mbps

DSSSDBPSK@1MbpsDQPSK@2Mbpsand CCK@5.5/11Mbps

MIMO-OFDMBPSK, QPSK, 16QAM, 64QAM, 256QAM and 1024QAM

OFDMA (up to 1024-QAM)

Receiver Sensitivity

11b-96dBm1Mbps-93dBm5Mbps-89dBm11Mbps

11a/g-91dBm6Mbps-85dBm24Mbps-80dBm36Mbps-74dBm54Mbps

11n-90dBmMCS0-70dBmMCS7-89dBmMCS8-68dBmMCS15

11ac HT20-88dBmMCS0, -63dBmMCS9

11ac HT40-85dBmMCS0, -60dBmMCS9

11ac HT80-82dBmMCS0, -57dBmMCS9

11ax HT80-82dBmMCS0, -57dBmMCS9, -52dBmMCS11

Antenna

Integrated antenna design (5th gen X-Sense patent smart antenna)

Antenna Gain

2.4G: 3dBi

5G: 3dBi

Service Ports

1 100M/1000M/2.5G/5G/10G Base-T (PoE In), 1 10G SFP+, 1 10/100/1000M Base-T ports (PoE In), 1 10/100/1000M Base-T ports (LAN/IoT Expansion)

Management Port

1 console port

USB

1 USB 2.0 port

IoT Capability

BLE

Reset Button

Support

Anti-theft Lock

Support

LED Indicator

1 LED indicator (Supports red, green, blue, orange and flashing mode, which indicates device access. The indicator can be switched off to silent mode.)

Transmit Power

≤100mw20dBm (vary depending on different countries)

Adjustable Power

1dBm

Power Supply

Local power supply (DC 48V/1A) Power adapters are sold separately

PoE+ (802.3at)

PoE (802.3af) –device cannot power up

Power Consumption

40W

Physical Specifications

Temperature

Operating Temperature: -10°C to 45°C

Storage Temperature: -40°C to 70°C

Humidity

Operating Humidity: 5% to 95% (non-condensing)

Storage Humidity: 5% to 95% (non-condensing)

Installation Mode

Ceiling/wall-mountable

Dimensions (W x D x H)

290mm×64mm (Height of the AP only, excluding the mount kit and modelling)

Weight

AP 3.05Kg, Mount Kit 0.2Kg

IP Rating

IP41

MTBF

250,000 hours

Certifications and Compliance

Safety Standard

GB4943, EN/IEC 60950-1

EMC Standard

GB9254, EN301 489

Health Standard

EN 62311

Radio Standard

SRRC, EN300 328, EN301 893

Software Specifications

WLAN

Maximum clients per AP

1024

Recommended clients per AP

64

BSSID capacity

Up to 32

SSID hiding

Support

5G Priority (Band Steering)

Support

Configuring the authentication mode, encryption mechanism and VLAN attributes for each SSID

Support

Remote Intelligent Perception Technology (RIPT)

Support

Intelligent device recognition technology

Support

Intelligent load balancing based on the number of users or traffic

Support

STA control

SSID/radio-based

Bandwidth control

STA/SSID/AP-based bandwidth control

Data encryption

WPATKIP, WPA-PSK, WPA2AES, WEP64/128 bits

PSK and web authentication

Support

PPSK authentication (For Employee)

Support (require wireless controller)

802.1x authentication

Support

PEAP authentication

Support

Data frame filtering

Whitelist, static/dynamic blacklist

User isolation

Support

Rogue AP detection and countermeasure

Support

Dynamic ACL assignment

Support

RADIUS

Support

CPU Protection Policy (CPP)

Support

Network Foundation Protection Policy (NFPP)

Support

IP

IPv4 and IPv6 address

Support

Multicast routing

Multicast to unicast conversion

DHCP service

DHCP Snooping, Option 82, Server, Client

Management and Maintenance

Supported wireless LAN controllers

Ruijie WS Series Wireless Controller

Ruijie MACC-Base Software Controller

Ruijie Cloud (Public Cloud)

Management protocol

Telnet, SSH, TFTP, Web

Wireless Intelligent AI Optimization Service (WIS)

Support

SNMP

SNMPV1,V2c,V3

Syslog / Debug

Support

FAT/FIT/MACC mode switching

Factory default firmware supports FAT (standalone) or FIT mode (WS controller) or MACC mode (Ruijie MACC-Base or Ruijie Cloud) management


Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Attachment  
*only support gif, jpeg, jpg, png, pdf
Messages*  

Switch to Mobile Version